Motor AC/DC Series ½ hp (375watts) 100 or 240volt

Variable Speed Controls Electronic 0-1400 SPM Smooth full power at all speeds
Throat Depth AF-19?AF20VS 20” (510mm)
Throat Depth 25VS -Type D 25” (635mm)
Table AF-19VS 18” X 24” (460mmX610mm) in high quality birch plywood
AV20VS AF25VS - Type D 18” X 24” (460mmX610mm) 2 position hard alloy table
Table Tilt 45deg to the left. Locks in all positions20 deg to the right
Blade Stroke 30mm
Blade Cutting Positions The blade cutting angle is fully adlustable. The blade can be rotated in its holders to cut in any direction across the table. Very Useful when cutting large sheets UNIQUE TO THE DIAMOND FRETSAW

Blade Holders type 6 These are fitted as standard equipment on all machines and will take all normal 5”fret blades, 5”and 7”pin end coping saw blades, junior 6” and all hacksaw blades up to 12” long plus rod and abra files.
Blade Change Speed Change fret blade in 20 seconds.
For Type 6 Change pin-end blade in 12 seconds.
Change bandsaw blade in 15 seconds
Blade Change Speed
For Type 7 Piercing work with fret blades only. Change complete blade in 10 seconds. Release top end-pass throeugh work and re-tension 6 seconds. (Conservative timings)
BELIEVED TO BE THE WORLDS FASTEST BLADE CHANGE SYSTEM WITH “DIAMOND PATENT” BLADE HOLDERS
Under arm Clearance Over 4” clearance between the top arm and table gives plenty of room for large work using 5” fret blades and over 10” clear with longer blades
Relief Action Blade releif on the upstroke prevents work jumping up with the blade. Will NOT affect accuracy.
Blade Accuracy Better than one thou (.001”) side tolerances.
Power take Off Shaft Fitted to both machines to take a powerful flexible drive shaft. Can be fitted with a great variety off drills and tools.
Anti-Chatter Device Controls the action of the top arm in the event of blade breakage. This is a safety feature and reduces any risk to damage done to work.
Cutting Capacity Hard and soft woods 4” PVC plastics 4” cast iron, mild steel and brass 1½” Aluminium 3”
Dimensions AF-19VS/AF20VS Height 18” Width18” Length 33” (Table Fitted) AF25VS-Type D Height 18” Width18” Length 38” (Table Fitted)